Kitchens

Frosty white modern u shaped kitchen design with high.

The Frosty white modern u shaped kitchen design with high is built to order, so it is made for your room rather than picked off a shelf. Socket and switch positions are agreed against the final layout, so no appliance ends up on an extension lead. Edge banding is specified heavier than the minimum, because thin banding lifts within a couple of years in our humidity. Nothing here is fixed. We measure your room first, then adjust the design around it.

ModernU shapedFrosty whiteMade to orderLahore
  • Free 3D design before manufacturing
  • Installed by our own teams
  • Custom sizes, colours and finishes
  • Made to order in our own Lahore facility
Free measurement and 3D design. We measure your space in Lahore, show you the design in 3D, then manufacture and install it. Nothing is charged until you approve the design.
StyleModern
LayoutU shaped
ColourFrosty white
BuildMade to order
How We Build It

Inside the design.

Under the sink

The wettest part, specified properly

The cabinet under the sink takes more moisture than anything else in the room, so it is built and sealed for that rather than treated like every other carcass.

Storage

Planned around how you actually cook

Deep drawers for pots, a pull out for masalas beside the hob, and a decided place for the atta drum and the pressure cooker. The internals are planned around your habits before the design is signed off, not fitted around what is left over.

Ventilation

Built for high heat cooking

Frying and tarka put far more grease into the air than most kitchen designs assume. Extraction position and the surfaces immediately around the hob are chosen so the kitchen still cleans down easily in a year.

Edges

Banding that stays down

Thin edge banding lifts within a couple of years in our humidity. Heavier banding costs more and is the difference between a piece that still looks new and one that visibly does not.

Design first

You approve it in 3D before it is cut

You see the piece rendered in your own room before manufacturing starts, so changes happen on a screen rather than on site where they cost money.

Aftercare

We come back and adjust it

Fronts and drawers settle slightly in the first weeks of use. The team that installed it returns and adjusts them. That is part of the job, not an extra visit.

How We Build It

Four steps, no surprises.

01

Survey

We visit your address in Lahore, measure the space and record the services already in place.

02

Design & Quote

You see it in 3D and receive a written estimate. Nothing is cut until you approve both.

03

Manufacture

Built at our Raiwind Road facility with imported boards and soft close hardware.

04

Install & Handover

Fitted by our own teams, then adjusted after handover if anything settles.

What Is Included

From measurement to installed.

One point of contact

A single person stays on your project from measurement through to handover.

Free measurement visit

Our team visits your address in Lahore, measures the space and records the services already in place.

Free 3D design

You see the design rendered in 3D before anything is manufactured, so changes happen on screen rather than on site.

Made in our own facility

Manufactured at our Raiwind Road facility rather than subcontracted out, so quality and timing stay with us.

Imported boards and hardware

Boards, hinges and channels are imported, with soft close hardware fitted as standard.

Installed by Grains teams

The crew that installs it works for us, so the finish is our responsibility from first cut to final adjustment.

Good To Know

Questions, answered.

Yes. Nothing in this range is a fixed size. We measure your space first and build the kitchen to those dimensions, so it fits wall to wall instead of leaving a gap.

Yes. The photographs show one combination. The same design can be built in a different colour, finish or material, and we will show you the alternative in a 3D render before manufacturing starts.

Yes. Visit a Grains display centre in Lahore, or the manufacturing facility at LDA Chowk on Raiwind Road, and see the boards, hardware and finish in person.

Our facility and display centres are in Lahore and that is where we work most. For projects elsewhere in Pakistan, message us with the location and we will tell you honestly whether we can deliver and install to our standard there.

Want this in your home?

Send us the room measurements, or just a photo of the space. We will visit, measure it properly and show you a free 3D design of the Frosty white modern u shaped kitchen design with high built for your room before you spend anything.

Or call us directly, +92 320 4443864