Aesthetic Door.
This is the Aesthetic Door, one of the door designs we manufacture in house. The timber and the frame allowance are set so it still closes cleanly once monsoon humidity arrives. The same team that measures it also builds and installs it, so nobody is passing responsibility along a chain. Treat the photographs as a starting point. Sizes, colours, materials and internal layout are all decided by you.
- Free 3D design before manufacturing
- Installed by our own teams
- Custom sizes, colours and finishes
- Made to order in our own Lahore facility
Inside the design.
Weight where it matters
On a main door the leaf, the frame and the fixing into the structure matter more than the lock brand. The whole assembly is specified together rather than treated as a door with hardware added.
A door that closes quietly
A solid leaf stops far more sound than a hollow one, which is the difference between a bedroom that feels private and one that does not.
Both faces treated equally
Both sides are finished to the same standard, including the edges. Doors usually fail first on the edge that nobody thought would be seen.
One team, drawing to installation
The same company designs it, manufactures it and installs it. There is no contractor blaming a supplier and no supplier blaming a contractor, which is usually where interior projects go wrong.
The parts you never see
Hinges and channels are where budgets are quietly cut, because nobody can photograph them. Ours are imported and soft close as standard, so fronts close the same way in year five as in week one.
Banding that stays down
Thin edge banding lifts within a couple of years in our humidity. Heavier banding costs more and is the difference between a piece that still looks new and one that visibly does not.
Four steps, no surprises.
Survey
We visit your address in Lahore, measure the space and record the services already in place.
Design & Quote
You see it in 3D and receive a written estimate. Nothing is cut until you approve both.
Manufacture
Built at our Raiwind Road facility with imported boards and soft close hardware.
Install & Handover
Fitted by our own teams, then adjusted after handover if anything settles.
From measurement to installed.
Finish and colour your choice
Colour, finish and material are chosen by you and matched to the rest of the room.
After sales support
Adjustments after handover are handled by the same team that installed it.
One point of contact
A single person stays on your project from measurement through to handover.
Free measurement visit
Our team visits your address in Lahore, measures the space and records the services already in place.
Free 3D design
You see the design rendered in 3D before anything is manufactured, so changes happen on screen rather than on site.
Made in our own facility
Manufactured at our Raiwind Road facility rather than subcontracted out, so quality and timing stay with us.
Questions, answered.
Yes. Nothing in this range is a fixed size. We measure your space first and build the door to those dimensions, so it fits wall to wall instead of leaving a gap.
Yes. The photographs show one combination. The same design can be built in a different colour, finish or material, and we will show you the alternative in a 3D render before manufacturing starts.
Yes. Visit a Grains display centre in Lahore, or the manufacturing facility at LDA Chowk on Raiwind Road, and see the boards, hardware and finish in person.
Our facility and display centres are in Lahore and that is where we work most. For projects elsewhere in Pakistan, message us with the location and we will tell you honestly whether we can deliver and install to our standard there.
Want this in your home?
Send us the room measurements, or just a photo of the space. We will visit, measure it properly and show you a free 3D design of the Aesthetic Door built for your room before you spend anything.
Or call us directly, +92 320 4443864