Chestnut Door.
Chestnut Door. A Grains door, cut, finished and installed by our own teams. Hardware is set into the leaf during manufacture rather than cut in on site. The same team that measures it also builds and installs it, so nobody is passing responsibility along a chain. Treat the photographs as a starting point. Sizes, colours, materials and internal layout are all decided by you.
- Installed by our own teams
- Custom sizes, colours and finishes
- Made to order in our own Lahore facility
- Imported boards, hinges and channels
The thinking behind it.
A door that closes quietly
A solid leaf stops far more sound than a hollow one, which is the difference between a bedroom that feels private and one that does not.
Both faces treated equally
Both sides are finished to the same standard, including the edges. Doors usually fail first on the edge that nobody thought would be seen.
Hung so it still shuts in July
A door fitted perfectly in January can bind once monsoon humidity arrives. Timber is selected and the frame allowance set so it closes cleanly through the year rather than for one season.
The parts you never see
Hinges and channels are where budgets are quietly cut, because nobody can photograph them. Ours are imported and soft close as standard, so fronts close the same way in year five as in week one.
Banding that stays down
Thin edge banding lifts within a couple of years in our humidity. Heavier banding costs more and is the difference between a piece that still looks new and one that visibly does not.
You approve it in 3D before it is cut
You see the piece rendered in your own room before manufacturing starts, so changes happen on a screen rather than on site where they cost money.
Four steps, no surprises.
Survey
We visit your address in Lahore, measure the space and record the services already in place.
Design & Quote
You see it in 3D and receive a written estimate. Nothing is cut until you approve both.
Manufacture
Built at our Raiwind Road facility with imported boards and soft close hardware.
Install & Handover
Fitted by our own teams, then adjusted after handover if anything settles.
From measurement to installed.
After sales support
Adjustments after handover are handled by the same team that installed it.
One point of contact
A single person stays on your project from measurement through to handover.
Free measurement visit
Our team visits your address in Lahore, measures the space and records the services already in place.
Free 3D design
You see the design rendered in 3D before anything is manufactured, so changes happen on screen rather than on site.
Made in our own facility
Manufactured at our Raiwind Road facility rather than subcontracted out, so quality and timing stay with us.
Imported boards and hardware
Boards, hinges and channels are imported, with soft close hardware fitted as standard.
Questions, answered.
Yes. Nothing in this range is a fixed size. We measure your space first and build the door to those dimensions, so it fits wall to wall instead of leaving a gap.
Yes. The photographs show one combination. The same design can be built in a different colour, finish or material, and we will show you the alternative in a 3D render before manufacturing starts.
Doors and drawers settle slightly in the first weeks. The team that installed it comes back and adjusts them. That is part of the job, not an extra.
Yes. Grains manufactures and installs with its own teams. You are not coordinating between a supplier and a separate carpenter, which is where most delays and finger pointing come from.
Want this in your home?
Send us the room measurements, or just a photo of the space. We will visit, measure it properly and show you a free 3D design of the Chestnut Door built for your room before you spend anything.
Or call us directly, +92 320 4443864